Bowling placement test
Meet the Bowling Professor
A must have bowling book
Here's the free stuff
Ask the professor
distribButton
Favorite websites
Special thanks goes to
Signbutton

Shop for Bowling Equipment!

Dare to test your bowling knowledge

Name:

E-mail:

1. What is the best way to shoot a 10 pin?

2. What type alignment should you use on dry lanes to induce skid?

3. If you are bowling on oily heads and hooking backend, which would be the best ball to use?

4. What mode of alignment does not change the arc point?

5. If your toe-to-shoulder is 10 boards and you drift 4 boards right, what is your base key?

6. What is your perspective variable?

7. If you are bowling on a lane condition where the heads are hooking and the backends are tight, which would be the best ball to use?

8. In leaving a bucket, what should you do to convert the spare?

9. What must you define in determining the correct zone on the lane to play?

10. If you are bowling on hooking heads and hooking backends, which ball should you throw?

11. Out of the following lane conditions which will yield the lowest scores?

12. What is C.G.?

13. What is the difference between pin-in and pin-out on a bowling ball?

14. What is track flare?

15. When should you change balls?

[Meet the Professor]  [Required Reading]  [Class Notes]  [Take Test]   [Q&A Session]  [Become a Distributor]  [Links]  [Special Thanks] [E-mail] [Guestbook]

Copyright Larry Mathews 1998-2002. All rights reserved